Categories
Newsletter
Clutch master cylinder Volvo 200 series 240 260
Clutch master cylinder Volvo 200 series 240 260 Summary
Clutch Master cylinder to fit Volvo 240 and 260
Supplied with a new nut that needs to be fitted to the original pipe.
Supplied with a new nut that needs to be fitted to the original pipe.
Updating Order Details
Please do not refresh or navigate away from the page!
Customer Reviews
1 review(s) posted (write review)
Needs a little work to use - Johan - 26 June 2017
There is a little work needed to use this cylinder:
- If you want to use a braided teflon line, the thread is 7/16-20 or AN4.
- The flange to mount the cylinder is a bit smaller than the original hole in the firewall, so you need to fabricate something to close the gaps (I made a rubber seal)
- The holes don't line up exactly with the holes in the firewall. Needs a little massaging to get some bolts in
- When using a 90 degree AN3 coupler and a AN4 AN3 reducer, you need to massage the strut tower for enough clearance. The OEM hardline will probably clear the strut tower better.